Services

RV Water and Plumbing Repair

RV plumbing packs a pump, fresh tank, water heater and holding tanks into a moving vehicle, so vibration and freezing make leaks and pump problems common.

A technician shines a flashlight on a water pump and plumbing lines under an RV dinette seat

Illustrative image

  1. 01Request
  2. 02Coverage confirmed
  3. 03Scope approved
  4. 04Visit and next steps

Signs

When to request it

  • Water pump cycles on and off when no tap is open.
  • Puddles under sinks, a damp floor or water in a storage bay.
  • Low pressure, sputtering taps or no hot water.
  • Tank sensors that always read full or empty, or sticking dump valves.

Scope

What the work can cover

Plumbing work can include pump testing and replacement, leak tracing and fitting repair, water heater service (anode rod where applicable, bypass valves, igniters and elements), check valves, faucets, toilets and tank valve replacement.

Limits

Holding-tank replacement, frame-mounted tank work or extensive freeze damage behind finished walls can be large jobs. Black-tank work requires the tank to be emptied first at a proper dump facility.

Before the visit

Safe preparation

  1. Turn off the water pump and city water connection if you see an active leak.
  2. Empty holding tanks at an approved dump station before a valve or toilet repair.
  3. Note whether the problem happens on the pump, city water or both.
  4. Clear the cabinets or storage areas that give access to the plumbing.

Diagnosis

What diagnostic work involves

Leak tracing often starts by pressurizing the system with the pump and watching for pressure drop, then isolating sections. Water heater diagnosis checks propane and electric modes separately because they share a tank but not their controls.

Before repairs begin, you approve the scope. If a part must be ordered or the job needs shop equipment, you are told before any further visit.

Questions

Common questions

Why does my water pump turn on by itself?

A small leak, a dripping faucet or a failing check valve lets pressure drop, so the pump cycles to rebuild it.

Should I use a pressure regulator on city water?

Many RV manufacturers recommend one because campground water pressure varies. Check your owner manual for the recommended pressure.

Are tank sensor readings reliable?

Probe-type sensors are often fooled by residue. Cleaning can help, but some owners replace them with external sensors.

Request: Water and Plumbing

Send the details and your location. We confirm coverage first, then scope.